Types of Wood Burners Near Me
Wood burning stoves offer an economical alternative to fossil fuel and electricity heating. They also decrease the dependence on imported wood, a significant source of carbon.
In areas where wood smoke is common studies have proven that it contributes to wintertime pollution in the air. This is especially the case in valleys susceptible to temperature inversions.
1. Pine
It is common to use pine wood for log burners. However, it must be dried before using indoors. Unseasoned pine wood is more likely to generate creosote that can lead to chimney block ups. In addition, pine wood that is not seasoned will produce a lot of smoke and carbon monoxide which is toxic to humans and pets.
Many people do not recommend using pine wood for their firewood due to its resin content and fear of creosote building up. Creosote, a tar-like substance, coats your chimney flue to prevent smoke from leaving your home. If it gets too thick, it can cause the chimney to catch fire, which is very dangerous. Hardwoods like oak Hickory and maple Ash do not produce much creosote, and they burn more hotly and produce less smoke.
The reason that pine wood produces many creosote particles when it is burned is because it was not properly seasoned. All wood needs to be dried out prior to burning inside. Seasoning the wood removes the moisture content, making it easier to ignite and burn. If pine wood has been seasoning it will burn more efficiently with less spitting and sparking. It also produces lots of heat. It will still release an enormous amount of creosote when it is burned. Most people prefer hardwoods like oak or hickory over pine wood when burning it.
2. Cedar
Cedar is a soft wood, and while it produces some decent heat, it doesn't produce as much heat as other types of hardwood firewood. It also burns very quickly and can cause creosote buildup in the chimney. Many people are reluctant to use cedar in their fireplaces due to this.
For those who don't have any concerns about creosote and other issues cedar is a great choice for outdoor fireplaces that burn wood. Cedar isn't the best choice for indoor fireplaces because of the oils that are released when the fire is burning. If you're planning to install a fireplace in your home you should pair it with a more dense wood like oak or hickory.
The cost of firewood is influenced by region, however a complete cord is priced between $150 and $500. The amount of wood you buy will last between 6 and 12 weeks if you burn it twice every day.
You can save money by cutting your own firewood if you don't have to purchase a entire cord. Certain tree companies offer this service. However, if you have the right equipment you will save money.
Green or unseasoned wood usually costs less than seasoned wood. If you plan to purchase firewood, consider buying it in the spring if possible. This will give the wood a year to season, which helps it burn better and with less smoke. It also makes the process more efficient and reduces delivery fees. If you want to go a step further, consider hiring a professional to split and stack your firewood.
3. Birch
Birch wood stoves near me can be a great choice for those seeking a fireplace set that is both attractive and eco-friendly. These beautiful logs, constructed from birchwood, come with realistic embers that give the appearance of a genuine fireplace fire.
Decorative birch wood logs are also ideal for outdoor fire pits. They are simple to light and don't create a lot of smoke or sparks. This makes them an excellent option for those with only a small amount of space in their backyard or patio space.
The thin Birch is a versatile hardwood that has waterproof bark. It is used for various purposes like paper making and homeopathy, construction of canoes, and more. Its wood is highly sought-after by artists, musicians and craftsmen because of its unique texture and grain.
Silver birch is a wonderful hardwood for firewood. However, it does not have the same density as other woods such as oak or hornbeam. A cord of silver birch won't be as hot. Birch is a type of woodland timber that is harvested during thinning of the forest.
Birch wood is low in resin, which means it doesn't spit or spark when burned. It is also burned green, but it does need to be well-seasoned. It is an excellent alternative to basswood, which contains a lot of water and needs to be dried prior to burning.
4. Maple
Maple is a fantastic option for wood-burning stoves because it burns hot and brightens quickly. It also is a good choice for seasoned wood. It doesn't last nearly as long as other hardwoods, such as oak and hickory.
This wood is available in soft and hard varieties and is available in a variety of shapes and sizes including live edge. It also comes in natural hue that blends into both traditional and contemporary decor. The wood comes in a kit that contains all the components and accessories needed to get started. The kit comes with the wand/pen and solid brass tips in both flat and round shapes, as well as shader tips. wood burning stoves near me are used for shading the image, which is a method to create realistic effects. Many people utilize this method to create commission-based artworks of their family or pets.
Generally speaking, hardwoods like maple and hickory burn for longer than softwoods like pine and fir. This is because hardwoods tend to have lower pitch than softwoods, which leads to a fire that burns longer and leaves less creosote in the chimney.
Maple is a popular firewood that is found throughout the United States. It is a strong hardwood with a high btu/lb. It is also easy to split. It is an excellent alternative to ash wood which is often in short supply because of the emerald leaf borer. When properly treated, this wood will have long burning, steady flames.
5. Cherry
The firewood logs made of cherry produce an even burn and are dense wood, making it a great option for those who want lasting ambiance from their fireplace. It has a pleasant aroma and does not produce much smoke. It is more sparky than other hardwoods, but you can easily control it by using a fireplace filter.
Pine Pine is available and affordable, however it doesn't season as well as hardwoods and can make it difficult to begin. It is a great choice to start a fire and for getting a fire started but you should change to hardwoods after the flames have established.
Alder Alder has a moderate cost and is simple to split. It has a slow burning with a high output of heat. However it can be a disappointment to use in an open fire because it can ignite sparks.
Ash Oak is considered the most durable hardwood. It is the one that produces the most heat, but is also extremely expensive. The cost is worth it however, for those who want the most sturdy and efficient wood for your fireplace.
Contact us today if looking to install a brand new fireplace or wood stove to your home. We will inform you about the different types we have available and help you select the right one for you. Our Hearth Professionals who are certified by NFI are ready to assist you with any questions you might have.
6. Oak
Many people prefer using oak logs for their fireplace or stove because they have a lovely traditional, classic scent. It is also longer burning than other types of logs, and can keep you warm for longer. It is a great option for anyone looking to enjoy those long nights sat around the fireplace or outside in the garden in summer with family and friends chatting and drinking wine.
Unlike coniferous trees and hardwoods, such as hickory or oak have higher density and offer greater efficiency in fuel. This means that they burn longer, hotter and leave more coals so that you can restart your fire easily.
Beech
While beech logs are good quality, they can take a while to season and split. They do burn well, generating bright flames and a lot heat. They are ideal to mix with other slow burning logs, such as Ash or Oak.
Beech wood can be found at local garden centres and supermarkets however you should not purchase pallets used to transport timber because they'll be full of nails and screws and will likely require treatment with chemicals like methyl bromide before they can be burned safely. If you're searching for a cheap wood to use for your log burner you should consider reaching out to local tree trimmers and construction crews as well as storm cleanup teams to see whether they have spare firewood they can sell. Be sure to check any sourced wood for safety and ensure that it has been treated with a non-toxic preservative such as mineral oils or linseed oil.